Change font size   Print view

D8Bridge stopped working after update to W8.1

Discussion board for the D8Bridge users

D8Bridge stopped working after update to W8.1

Postby RustyNotes » Sun Nov 10, 2013 12:10 pm

I don't know what I did wrong.. but i can't run D8bridge anymore since i upgraded to Windows 8.1
When I run D8Bridge, an error comes up saying: Could not initialize COM port from last configuration

I have a serial to usb-adapter, and no matter which USB port I plug it in, it doesn't work. When I look in the Device manager, it says that I'm connected to "com port 5", and even If i choose com 5 in D8Bridge, I'm out of luck. Same thing happens if i try to plug it in another USB port (for example "com port 3"). Same thing there, same error. I've tried to uninstall the drivers and re-installed them, but no luck there either.

Do any of you have a fix for this? If not.. Marc.. please hurry with D8brige 2.0 so I can use it with ethernet! :D
RustyNotes
Registered user
 
Posts: 49
Joined: Thu Mar 14, 2013 9:56 pm

Re: D8Bridge stopped working after update to W8.1

Postby Marc Girard » Sun Nov 10, 2013 8:27 pm

It might be that the fact that W8.1 has changed the COM port? Just saying, if it was working in Win7/8, it should work in 8.1, there's no "major" changes. Kinda hard to diagnose over a forum post... ;)
Marc Girard
Bluaudio.org
http://www.bluaudio.org/d8bridge
User avatar
Marc Girard
Moderator
Moderator
 
Posts: 278
Joined: Wed Oct 13, 2010 5:26 am

Re: D8Bridge stopped working after update to W8.1

Postby RustyNotes » Mon Nov 11, 2013 6:02 pm

Yeah I know. When I get home, i'll try reinstall loopmidi and everything else and take some snapshots :)
RustyNotes
Registered user
 
Posts: 49
Joined: Thu Mar 14, 2013 9:56 pm

Re: D8Bridge stopped working after update to W8.1

Postby RustyNotes » Mon Nov 11, 2013 8:48 pm

nope.. doesn't work..

Image

FULL IMAGE: http://i42.tinypic.com/10wpb4n.png
:(
RustyNotes
Registered user
 
Posts: 49
Joined: Thu Mar 14, 2013 9:56 pm

Re: D8Bridge stopped working after update to W8.1

Postby Marc Girard » Tue Nov 12, 2013 5:43 pm

RustyNotes wrote:nope.. doesn't work..


I just installed Windows 8.1 on my laptop. Will investigate that problem.
Marc Girard
Bluaudio.org
http://www.bluaudio.org/d8bridge
User avatar
Marc Girard
Moderator
Moderator
 
Posts: 278
Joined: Wed Oct 13, 2010 5:26 am

Re: D8Bridge stopped working after update to W8.1

Postby bitSync » Wed Nov 13, 2013 12:01 am

RustyNotes wrote:nope.. doesn't work..

Image

FULL IMAGE: http://i42.tinypic.com/10wpb4n.png
:(


I noticed it looks like you have an orphaned MIDI Output port for Mackie Control Unit 1 (unless the LoopMIDI ports are numbered from 0 rather than 1 and for some reason 0 doesn't show up). It looks as though all your port assignments may have shifted "left" by 1 port. I've seen this in D8Bridge v1.1 repeatedly as a consequence of any number of circumstances including adding or deleting MIDI devices or device driver updates between D8Bridge invocations; installing Windows 8.1 might qualify as one of these circumstances, I don't know. My theory is that the D8Bridge v1.1 MIDI port mapping is using discrete indices or offsets to MIDI ports rather than the actual port identity, so if the MIDI port mapping changes in the port array between D8Bridge invocations, D8Bridge doesn't know and just uses its last known index/offset. You may want to remap your loopMIDI ports using the D8Bridge GUI (Start with the highest numbered MIDI port first (Port 6) and work downwards, otherwise, if you try to assign e.g., Port 5 when it's already assigned elsewhere, bad stuff happens and you'll have to reboot D8Bridge).

This may not fix your COM problem, but who knows... Best of luck!
Win7 Pro x64 SP1 / SONAR 2016 Platinum x64 Newburyport / 2x Mackie d8b 5.1 + (D8Bridge v1.1 x32 or ProBox) / 3.20 GHz Intel i7 950, 24 GB DDR3 RAM, 2TB SATA3 SSD / RME HDSP9652 PCI (ASIO) / RME ADI-8 QS / New Belgium 1554
User avatar
bitSync
Premium Member
Premium Member
 
Posts: 381
Joined: Sat Dec 13, 2008 4:01 pm
Location: Baltimore, MD, USA

Re: D8Bridge stopped working after update to W8.1

Postby bitSync » Wed Nov 13, 2013 12:12 am

Also, the port order for MCU3 seems inconsistent with MCU1 and MCU2. The order is reversed?
Win7 Pro x64 SP1 / SONAR 2016 Platinum x64 Newburyport / 2x Mackie d8b 5.1 + (D8Bridge v1.1 x32 or ProBox) / 3.20 GHz Intel i7 950, 24 GB DDR3 RAM, 2TB SATA3 SSD / RME HDSP9652 PCI (ASIO) / RME ADI-8 QS / New Belgium 1554
User avatar
bitSync
Premium Member
Premium Member
 
Posts: 381
Joined: Sat Dec 13, 2008 4:01 pm
Location: Baltimore, MD, USA

Re: D8Bridge stopped working after update to W8.1

Postby RustyNotes » Wed Nov 13, 2013 10:32 pm

well, i can't change any of the left hand side ports.. the program freezes and i have to do the old good ctrl+alt+del to close it. The right hand side I can change.. but not the left. Hah, fun! Can't wait for version 2.0 ^^
RustyNotes
Registered user
 
Posts: 49
Joined: Thu Mar 14, 2013 9:56 pm

Re: D8Bridge stopped working after update to W8.1

Postby RustyNotes » Wed Nov 13, 2013 11:10 pm

ok, just tried setting everything up correctly. All ports as they should be and the right COM. Still the same thing. So I give up and will be waiting for version 2.0 instead :)
RustyNotes
Registered user
 
Posts: 49
Joined: Thu Mar 14, 2013 9:56 pm

Re: D8Bridge stopped working after update to W8.1

Postby bitSync » Thu Nov 14, 2013 1:51 am

RustyNotes wrote:well, i can't change any of the left hand side ports.. the program freezes and i have to do the old good ctrl+alt+del to close it. The right hand side I can change.. but not the left. Hah, fun! Can't wait for version 2.0 ^^


To reiterate, you need to start with the highest numbered LoopMIDI port first, port 6, then work downwards to port 1. If you try to assign a port that is already assigned, e.g., like trying to reassign port 5 when it's assigned elsewhere, the program will lockup and then you'll have to kill the d8bridge.exe process for sure.

Also, probably the easiest thing you can do is to just shut down D8Bridge (make certain the process is not running, sometimes it looks like it has shut down when it hasn't), delete config.d8b (every freakin' instance of it on your machine) and start D8Bridge again. This will force D8Bridge to create a new config file as though this is its first invocation and you can start fresh with your port assignments. This might help you with your COM problem as well.

You are using the 32 bit .exe, right?

Let us know how you make out.
Win7 Pro x64 SP1 / SONAR 2016 Platinum x64 Newburyport / 2x Mackie d8b 5.1 + (D8Bridge v1.1 x32 or ProBox) / 3.20 GHz Intel i7 950, 24 GB DDR3 RAM, 2TB SATA3 SSD / RME HDSP9652 PCI (ASIO) / RME ADI-8 QS / New Belgium 1554
User avatar
bitSync
Premium Member
Premium Member
 
Posts: 381
Joined: Sat Dec 13, 2008 4:01 pm
Location: Baltimore, MD, USA

Next

Return to D8Bridge Forum

Who is online

Users browsing this forum: No registered users and 18 guests