Problem: no meter activity (Ver.3 software)

[FlametopFredVer2]

Hello.
Using a d8b running Version 3 software.

What is weird is how good this board sounds in comparison to the older Version 5 board I was using.

However, just this weekend, I was playing multitrack (Alesis HD24) which has been fine.
Now there is nothing being heard, and no meter activity.

Any thoughts? I am pulling my hair out.

[Casey_Pittman]

You never stated your setup so trouble shooting will be tough to do until you have.

Till then, make sure the sample rates match between units.

-Casey

[Crash]

Verify that is just the tape inputs that have gone away. Can you get a mic signal through the console?

[FlametopFredVer2]

tested with input - no signal coming in from inputs, from tapes ... no meter activity.

Everything "looks" normal in all the settings, all the connections.

I have torn out all my hair and now I am bald

[Crash]

What is your clock card situation? Are you using the Apogee or the stock card? This sounds like a clock issue, like there is no clock signal.

[SteveT]

Sounds like time for the "ribbon cable connection correction" treatment!!

SteveT