Change font size   Print view

PDI 8 digital D-SUB25 pinout schematic

Discussion board for Mackie's d8b Digital Console users.

PDI 8 digital D-SUB25 pinout schematic

Postby angelotaylor » Sat Jan 30, 2021 3:19 pm

Hello, my Friends!

I need to connect my Lexicon MPX550 reverb to alternate I/O PDI-8, I have digital version. I need D-SUB25 pinout schematic - cannot find it anywhere. May be somebody help me with it?
angelotaylor
Registered user
 
Posts: 104
Joined: Sun Jul 26, 2020 9:21 pm

Re: PDI 8 digital D-SUB25 pinout schematic

Postby Bruce Graham » Sat Jan 30, 2021 9:57 pm

Try here;

https://www.google.ca/search?ei=-7gVYJ6 ... CA0&uact=5

There are several different standards for AES/EBU wiring on a db25 connector. Really make sure you have the correct one.
The link above says it is for the d8b but it would be good to varify.
I looked quickly through the d8b 5.1 manual and didn't see any pin out.
Try contacting HOSA cable and see if they have a Pin-out diagram they would supply.
I will continue to look.

Good luck
Bruce
Bruce Graham
Premium Member
Premium Member
 
Posts: 717
Joined: Tue Mar 15, 2011 12:02 am
Location: Walkerton, Ontario, Canada

Re: PDI 8 digital D-SUB25 pinout schematic

Postby angelotaylor » Sun Jan 31, 2021 9:09 am

Bruce Graham wrote:Try here;

https://www.google.ca/search?ei=-7gVYJ6 ... CA0&uact=5

There are several different standards for AES/EBU wiring on a db25 connector. Really make sure you have the correct one.
The link above says it is for the d8b but it would be good to varify.
I looked quickly through the d8b 5.1 manual and didn't see any pin out.
Try contacting HOSA cable and see if they have a Pin-out diagram they would supply.
I will continue to look.

Good luck

Bruce


Hi, Bruce! I glad to see You! And thank You for information!
angelotaylor
Registered user
 
Posts: 104
Joined: Sun Jul 26, 2020 9:21 pm

Re: PDI 8 digital D-SUB25 pinout schematic

Postby angelotaylor » Sun Jan 31, 2021 8:16 pm

Ok, I think, I have solved this problem! Some other hardware, so as Avid, Digidesign, Universal Audio, RME -= use TASCAM type of pinout. Anyway, Mackie equipment - use Yamaha type pinout! Be careful, this is pinout for AES/EBU ONLY! Please, read russian term "распайка" as english "PINOUT"

Image
Last edited by angelotaylor on Mon Feb 01, 2021 11:24 am, edited 1 time in total.
angelotaylor
Registered user
 
Posts: 104
Joined: Sun Jul 26, 2020 9:21 pm

Re: PDI 8 digital D-SUB25 pinout schematic

Postby Bruce Graham » Mon Feb 01, 2021 6:48 am

Hey Angelo;
Glad y\ou got it worked out. I thought it was the Yamaha standard. If building your make sure to use 100 ohm cable, also very important.
Thanks for your music. So glad the Apogee card worked.
Keep Recoridng and Mixing but most of all have fun.
Bruce
Bruce Graham
Premium Member
Premium Member
 
Posts: 717
Joined: Tue Mar 15, 2011 12:02 am
Location: Walkerton, Ontario, Canada

Re: PDI 8 digital D-SUB25 pinout schematic

Postby angelotaylor » Mon Feb 01, 2021 11:13 am

Bruce Graham wrote:Hey Angelo;
If building your make sure to use 100 ohm cable, also very important.


Thank You for Your advice, mr. Bruce! ;-)
angelotaylor
Registered user
 
Posts: 104
Joined: Sun Jul 26, 2020 9:21 pm

Re: PDI 8 digital D-SUB25 pinout schematic

Postby Bruce Graham » Mon Feb 01, 2021 8:48 pm

Hey Angelo
Meant yto say 110 Ohm Balanced cable.
I was very tired as seen in all my spelling mistakes.
Cheers
Bruce
Bruce Graham
Premium Member
Premium Member
 
Posts: 717
Joined: Tue Mar 15, 2011 12:02 am
Location: Walkerton, Ontario, Canada

Re: PDI 8 digital D-SUB25 pinout schematic

Postby angelotaylor » Tue Feb 02, 2021 12:30 am

Bruce Graham wrote:Hey Angelo
Meant yto say 110 Ohm Balanced cable.
I was very tired as seen in all my spelling mistakes.
Cheers
Bruce


Hey mr. Bruce!

Now I hawe only 100 ohm cable. It is - working without any artefacts! But I deside to purchase cable from manufacture, some later, because I planning to use more Lexicon MPX processors that one (3 processors: Short Chamber, Long Chamber and chorus - it is very beautiful sound!!!). Manufacture digital D-SUB DB25 to XLR snake cables - is very expansive in Russia - I need save some money for it.

My respects, mr. Bruce!
angelotaylor
Registered user
 
Posts: 104
Joined: Sun Jul 26, 2020 9:21 pm

Re: PDI 8 digital D-SUB25 pinout schematic

Postby Bruce Graham » Tue Feb 02, 2021 1:17 am

Hi Angelo;
How many pairs are you looking for? and what length?
Thanks
Bruce
Bruce Graham
Premium Member
Premium Member
 
Posts: 717
Joined: Tue Mar 15, 2011 12:02 am
Location: Walkerton, Ontario, Canada

Re: PDI 8 digital D-SUB25 pinout schematic

Postby angelotaylor » Tue Feb 02, 2021 3:58 am

Bruce Graham wrote:Hi Angelo;
How many pairs are you looking for? and what length?
Thanks
Bruce


In any case, I need 3 pairs, and standart 1,7 m long. Also, I want metal RCA connectors on pairs (not XLR, because all my 3 Lexicon processors will have an RCA connectors and voltage comparators in SPDIF schematic for AES to SPDIF conversion. I will use an Lexicon MPX550 processors!) Now, I have only one Lexicon, but I will save money, and will buy also two units. It is not expensive processors, one unit I can buy for 100-130-150 US dollars in Russia. Lexicon MPX550 in Russia For comparison - snake cable will cost approximately also 150 US dollars! in Russia, from official distributor. Look: Snake d-Sub 25 cable in Russia I need save few hundred dollars, it will very long time at the rate of 76 rubles per 1 dollar! So, cables - to expensive!
angelotaylor
Registered user
 
Posts: 104
Joined: Sun Jul 26, 2020 9:21 pm

Next

Return to d8b Forum

Who is online

Users browsing this forum: No registered users and 4 guests

cron