Update on my looking into mounting a CF card into an RH58 media tray has turned up trumps
as I was going to purchase some cards and card readers I bought a few other bits to experiment with and looks like I may have cracked it,
I bought a 3.5 IDE drive bay to single CF StarTech CF ADAPTER CARD READER which has a jumper on it put the CF card into Master or Slave mode from Ebay and few cards, a 4gb sandisk Exteme III 30mb/s which wasn't fast enough so could only used for backup but testing a
(Recommended by Arjepsen) 32gb Sandisk Gold Label Extreme 120mb/s on my HDR worked out, I installed the StarTech CF ADAPTER CARD READER into the media tray (it was a snug fit but went in with no trouble, snug enough that it won't need screws to hold it in place) after formating it on my HDR it did the usual read/write test and it informed me that the card was fast enough and good for recording, so I went head and tranfered some projects to the 32gb card and it worked perfectly. So I'm going to mark this one as ticked off my Mackie bucket list.