Change font size   Print view

mark appears

Discussion board for Mackie's d8b Digital Console users.

Re: mark appears

Postby Phil.c » Mon Aug 19, 2019 12:20 pm

You have a wordclock cable from the HDR Sync card to the D8b Apogee.
User avatar
Phil.c
Premium Member
Premium Member
 
Posts: 1114
Joined: Sun Nov 23, 2008 10:58 pm
Location: South Wales

Re: mark appears

Postby Crash » Mon Aug 19, 2019 1:55 pm

Maybe this pdf will help. There is the exact scenario you are trying to do with the 2nd example.

https://c3.zzounds.com/media/hdr2496_hu ... 46da08.pdf
User avatar
Crash
Premium Member
Premium Member
 
Posts: 1286
Joined: Fri Nov 21, 2008 10:05 pm

Re: mark appears

Postby Phil.c » Mon Aug 19, 2019 2:02 pm

Why didn't I think of that :D
User avatar
Phil.c
Premium Member
Premium Member
 
Posts: 1114
Joined: Sun Nov 23, 2008 10:58 pm
Location: South Wales

Re: mark appears

Postby pino68 » Mon Aug 19, 2019 2:03 pm

Phil, this is a diagram of how I connected the cables

schema.jpg
schema.jpg (Array KiB) Viewed 1008 times
pino68
Registered user
 
Posts: 152
Joined: Thu Aug 17, 2017 10:52 pm

Re: mark appears

Postby arjepsen » Mon Aug 19, 2019 2:26 pm

you need to connect 2 midi cables.

Hdr out -> d8b in
AND
d8b out -> hdr in.

Think about it this way:
when you press play on the d8b, you want to the hdr to start playing: the d8b needs to send the "play" signal to the hdr.
You also want the hdr to update the display on the d8b, so the hdr also needs to send information back to the d8b...

Apart from this you also need the wordclock cable - this is needed to syncronize the two machines with each other.
If the d8b is master, then this goes from the output of the apogee card to the word clock input on the hdr.
arjepsen
Premium Member
Premium Member
 
Posts: 603
Joined: Sun Nov 02, 2014 9:10 pm

Re: mark appears

Postby pino68 » Mon Aug 19, 2019 2:54 pm

I try immediately and let you know.
pino68
Registered user
 
Posts: 152
Joined: Thu Aug 17, 2017 10:52 pm

Re: mark appears

Postby Phil.c » Mon Aug 19, 2019 3:05 pm

If I remember right, if you want the hdr to be the master clock then as you have it but d8b to external, if you want the d8b as master clock then clock cable out of the d8b to in on the hdr and clock set to internal and terminate switch to on with hdr.
User avatar
Phil.c
Premium Member
Premium Member
 
Posts: 1114
Joined: Sun Nov 23, 2008 10:58 pm
Location: South Wales

Re: mark appears

Postby pino68 » Mon Aug 19, 2019 4:54 pm

Thanks guys, I did everything as you told me, I also bought new cables, unfortunately it didn't help ... now my D8B gives me error 43 ... I can't get it to start anymore ... if I'm not crazy now I don't go crazy more ... I don't know what to do anymore. If imposed the W.C. on 48 KHz on the D8B and then I turn off. when I switch the setting back on it has changed, practically does not memorize the operations that are done on the setup window
pino68
Registered user
 
Posts: 152
Joined: Thu Aug 17, 2017 10:52 pm

Re: mark appears

Postby Phil.c » Mon Aug 19, 2019 5:10 pm

I'm not really undertanding what you're doing, are you saying that you have the d8b switched to 48khz, you showed us a picture of the setup screen and I've just noticed that it's set to 48khz when it should be 44.1, if you have the hdr set to 44.1 and the d8b to 48 you will get an errer message and bootup problems!

When was the battery changed in the cpu?
User avatar
Phil.c
Premium Member
Premium Member
 
Posts: 1114
Joined: Sun Nov 23, 2008 10:58 pm
Location: South Wales

Re: mark appears

Postby pino68 » Mon Aug 19, 2019 5:15 pm

The battery of the HDR 2 years ago and that of the D8B a year ago
pino68
Registered user
 
Posts: 152
Joined: Thu Aug 17, 2017 10:52 pm

PreviousNext

Return to d8b Forum

Who is online

Users browsing this forum: No registered users and 20 guests

cron