Change font size   Print view

Help! New user D8B

Discussion board for Mackie's d8b Digital Console users.

Help! New user D8B

Postby yrvin » Fri May 24, 2019 11:27 pm

Hello, I recently purchased d8b, what should I do next? The first time I work with a digital console. How to properly configure the inputs and outputs for each channel? And better please send me the already configured session, so I downloaded it. Thanks :)
yrvin
Registered user
 
Posts: 18
Joined: Fri May 24, 2019 6:04 pm

Re: Help! New user D8B

Postby Phil.c » Sat May 25, 2019 9:00 am

You need to tell us what other gear you are linking up to and what cards are installed into your d8b?
User avatar
Phil.c
Premium Member
Premium Member
 
Posts: 1114
Joined: Sun Nov 23, 2008 10:58 pm
Location: South Wales

Re: Help! New user D8B

Postby yrvin » Sat May 25, 2019 6:54 pm

At the moment, there is only one card installed in my d8b in the TAPE 17-24 slot, I still have more than one effect card. Earlier, I worked 7 years with analog equipment.
Attachments
DSC_3200.JPG
DSC_3200.JPG (Array MiB) Viewed 2321 times
DSC_3199.JPG
DSC_3199.JPG (Array MiB) Viewed 2321 times
DSC_3198.JPG
DSC_3198.JPG (Array MiB) Viewed 2321 times
yrvin
Registered user
 
Posts: 18
Joined: Fri May 24, 2019 6:04 pm

Re: Help! New user D8B

Postby Phil.c » Sat May 25, 2019 8:59 pm

The pictures are not really helpfull?

What do you want to configure the ins and outs to?
User avatar
Phil.c
Premium Member
Premium Member
 
Posts: 1114
Joined: Sun Nov 23, 2008 10:58 pm
Location: South Wales

Re: Help! New user D8B

Postby yrvin » Sun May 26, 2019 9:41 am

For live use. I need to sound drums and voice (for example). I will take the "insert" output from each channel to the audio interface (usb). It's more comfortable for me. I need the channels to just sound.
yrvin
Registered user
 
Posts: 18
Joined: Fri May 24, 2019 6:04 pm

Re: Help! New user D8B

Postby Phil.c » Sun May 26, 2019 5:22 pm

So, you need around six mics for drums and one or more for vocals, so what's the problem, just use the line outs...this is going to a PA, you're not using anything else with the d8b, no eq, compression or effects...forgive me if I'm wrong but if that's the case, any mixer would do?
User avatar
Phil.c
Premium Member
Premium Member
 
Posts: 1114
Joined: Sun Nov 23, 2008 10:58 pm
Location: South Wales

Re: Help! New user D8B

Postby yrvin » Sun May 26, 2019 6:36 pm

If it were an analog console, then everything would be without problems. I connect everything correctly, but I don’t know how to insist in D8B OS V5.1 itself. And thanks for helping.
yrvin
Registered user
 
Posts: 18
Joined: Fri May 24, 2019 6:04 pm

Re: Help! New user D8B

Postby Phil.c » Sun May 26, 2019 7:57 pm

V5.1 is not difficult, it's a shame not to use everything thats on board, one of the main things to get your head around is it's four banks, if it was analogue it would be four times the size, there's lots of help here on how to work it, once you get your head around it, you'll wish you had one a long time ago!
User avatar
Phil.c
Premium Member
Premium Member
 
Posts: 1114
Joined: Sun Nov 23, 2008 10:58 pm
Location: South Wales

Re: Help! New user D8B

Postby captainamerica » Mon May 27, 2019 1:11 pm

agree with Phil !
DAW: Genelec 8341,MacStudio, QuantumTB, Faderport16, DP, LogicProX, ProTools.BackupDAW:d8B, MacPro 2008 2xQuad-Core, MOTU (2408)LegacyDAW: A2000, Picasso II, Blizzard 68060@50 MHz|3xAD516 SunRize cards|HydraNexus Amiganet Ethernet.
User avatar
captainamerica
Premium Member
Premium Member
 
Posts: 338
Joined: Thu Nov 27, 2008 5:45 pm
Location: Boston, MA (org. from Montreal, Canada)

Re: Help! New user D8B

Postby yrvin » Mon Jun 03, 2019 10:45 pm

Sorry that i again ask, but my console still not working. I've already read the entire manual backwards and forwards. I did everything as it says, but the channels still refuse to sound. I don't use anybody effects. I just want that channels sound in LINE mode. Maybe i must buy even anybody PCI cards? One more time sorry for question.
yrvin
Registered user
 
Posts: 18
Joined: Fri May 24, 2019 6:04 pm

Next

Return to d8b Forum

Who is online

Users browsing this forum: No registered users and 25 guests

cron