Change font size   Print view

Mackie D8B

Discussion board for Mackie's d8b Digital Console users.

Mackie D8B

Postby Stamma2 » Thu Feb 08, 2018 1:24 am

When i turn on my Mackie d8b all lights on the board start flashing and a loud popping noise coming from the speakers, pop pop pop pop pop ! ! ! !. When i loosen the CPU cable slightly and screw it back in the popping stop. Help
Stamma2
Registered user
 
Posts: 1
Joined: Thu Feb 08, 2018 12:20 am

Re: Mackie D8B

Postby lyn69 » Thu Feb 08, 2018 1:45 am

Unscrew the BFC and spray the contacts with servisol and replace BFC tightly. Make sure there is no strain on the cable and it should be fine. I get this problem from time to time if I move the desk.
lyn69
Registered user
 
Posts: 34
Joined: Fri May 29, 2015 12:48 pm

Re: Mackie D8B

Postby captainamerica » Wed Feb 14, 2018 8:09 pm

there are TONS of articles around this issue on this site itself..suggest you also look at FAQ on Ribbon Cable Connection Correction Procedure http://www.sonido-7.com/d8b/maintenance.html
DAW: Genelec 8341,MacStudio, QuantumTB, Faderport16, DP, LogicProX, ProTools.BackupDAW:d8B, MacPro 2008 2xQuad-Core, MOTU (2408)LegacyDAW: A2000, Picasso II, Blizzard 68060@50 MHz|3xAD516 SunRize cards|HydraNexus Amiganet Ethernet.
User avatar
captainamerica
Premium Member
Premium Member
 
Posts: 338
Joined: Thu Nov 27, 2008 5:45 pm
Location: Boston, MA (org. from Montreal, Canada)


Return to d8b Forum

Who is online

Users browsing this forum: csp and 7 guests