Change font size   Print view

How can I activate D8B's Jog/Shuttle to work with PRO TOOLS

Discussion board for Mackie's d8b Digital Console users.

How can I activate D8B's Jog/Shuttle to work with PRO TOOLS

Postby M-A » Wed Jan 03, 2018 11:53 am

Hello guys, just one question:
How can I "activate" the D8B's Jog/Shuttle wheel to work in PRO TOOLS?

I was trying for days, changing PT preferences, activating (and de-activating) MMC, MTC, and other parameters and peripherals but NO LUCK.
D8B can't send these commands to Pro Tools 10HD or what ??.

I have a ProBox too.

Thank you in advance and best regards.
Last edited by M-A on Fri Jan 26, 2018 1:40 am, edited 1 time in total.
For those about to rock (we salute you).
User avatar
M-A
Registered user
 
Posts: 36
Joined: Sat May 05, 2012 12:30 am
Location: Madrid - España

Re: How can I activate D8D's Jog/Shuttle to work with PRO TO

Postby RJH_MUSIC » Wed Jan 24, 2018 10:31 pm

I used to have this working in Cubase before i unplugged everything to build a new studio and now i forget how to make it work again. The Jog/Shuttle wheel on the d8b is great because the detent clicks will synchronize to your quantise value making editing very quick. If i remember correctly you have to 1) tell the software to link to the d8b midi for MMC and MTC but more importantly, in MIDI devices you need to assign the d8b midi port to the the Mackie Control or HUI settings within your daw. There should also be a setting somewhere for Remote.
2 d8b's 5.1 OS all the plugins, Mackie 32.8 Bus, 2 iMAC 27", Apollo 8 Quad, Cubase 9, Logic Pro X, VEP 6, 4 TB of VSTi Libraries, 28 Roland, Yamaha & Korg Synths and Keyboards, NI Hardware and Software.. Plugins, Plugins, and the list goes on...
User avatar
RJH_MUSIC
Premium Member
Premium Member
 
Posts: 291
Joined: Fri Oct 26, 2012 4:24 pm
Location: Brookfield, CT

Re: How can I activate D8B's Jog/Shuttle to work with PRO TO

Postby M-A » Thu Jan 25, 2018 10:11 am

Thanks a lot for reply and putting me "on the way".

Inside Pro Tools, Peripherals>MIDI Controllers> window, I can assign 4 MIDI controller devices.
3 of them are assigned to PROBOX and the fourth is free. I'll try to assign the last one (#4) to Mackie D8B.

THANK YOU AGAIN !!
Last edited by M-A on Fri Jan 26, 2018 11:31 am, edited 2 times in total.
For those about to rock (we salute you).
User avatar
M-A
Registered user
 
Posts: 36
Joined: Sat May 05, 2012 12:30 am
Location: Madrid - España

Re: How can I activate D8D's Jog/Shuttle to work with PRO TO

Postby RJH_MUSIC » Thu Jan 25, 2018 5:08 pm

make sure you also find the entry for sending MIDI Time Code also so you can use the transport controls whiel inside your DAW.
2 d8b's 5.1 OS all the plugins, Mackie 32.8 Bus, 2 iMAC 27", Apollo 8 Quad, Cubase 9, Logic Pro X, VEP 6, 4 TB of VSTi Libraries, 28 Roland, Yamaha & Korg Synths and Keyboards, NI Hardware and Software.. Plugins, Plugins, and the list goes on...
User avatar
RJH_MUSIC
Premium Member
Premium Member
 
Posts: 291
Joined: Fri Oct 26, 2012 4:24 pm
Location: Brookfield, CT

Re: How can I activate D8B's Jog/Shuttle to work with PRO TO

Postby M-A » Thu Jan 25, 2018 5:52 pm

Rew/Fdw/Stop and Play buttons are working very well but not Jog/Shuttle wheel.
For those about to rock (we salute you).
User avatar
M-A
Registered user
 
Posts: 36
Joined: Sat May 05, 2012 12:30 am
Location: Madrid - España

Re: How can I activate D8B's Jog/Shuttle to work with PRO TO

Postby M-A » Wed Mar 14, 2018 11:32 am

Day after day making tests with NO LUCK...
Shuttle/Jog do not want to work within Pro Tools 10.

PLEASE: Any clues ??
Thanks in advance.
For those about to rock (we salute you).
User avatar
M-A
Registered user
 
Posts: 36
Joined: Sat May 05, 2012 12:30 am
Location: Madrid - España

Re: How can I activate D8B's Jog/Shuttle to work with PRO TO

Postby M-A » Wed Apr 25, 2018 5:04 pm

Nobody with the same problem?

I can't believe that I'm the only user trying to use Jog/Shuttle within Pro Tools software...
Any help will be greatly appreciated, guys.

THANK YOU SO MUCH IN ADVANCE
For those about to rock (we salute you).
User avatar
M-A
Registered user
 
Posts: 36
Joined: Sat May 05, 2012 12:30 am
Location: Madrid - España

Re: How can I activate D8B's Jog/Shuttle to work with PRO TO

Postby Old School » Sat Apr 28, 2018 4:05 am

Hi,
From what I can tell by searching the internet, Pro-tools doesn't exactly play nice with the D8B. (Can't speak from experience as I don't use PT) But the Pro-Box does. Contact or PM Munkustrap and ask him any specific questions you might have as to how to pro-box might allow you to use the D8B to control pro-tools. Please don't yell at us, as it is my experience that the people on here will give you the shirt off their back to help a guy out. Anyway, you might want to invest in a pro-box.

Have a blessed day in Christ,
Mike W.
Wanna make God laugh, ...Tell Him your plans
User avatar
Old School
Premium Member
Premium Member
 
Posts: 400
Joined: Thu Jun 16, 2011 8:42 pm
Location: Elm City NC

Re: How can I activate D8B's Jog/Shuttle to work with PRO TO

Postby M-A » Sat Apr 28, 2018 2:30 pm

I've not raised my voice (only to say THANK YOU in capital letters).
Anyway, I beg your forgiveness for misunderstanding.

Nobody trying to use Pro Tools and D8B working together?
I'm just surprised that no user has encountered the same problem as me.

I've Pro-Box and it's very nice.
However, from D8D (without Pro-Box) I can command PLAY, STOP, REW, FFW, etc... all except JOG/SHUTTLE.
I don't know if it is due a malfunction problem on my D8B or any other thing missconfigured using JOG/SHUTTLE, like MIDI/MMC/MTC.

Thank you very much and have a blessed day in Christ, too !!
For those about to rock (we salute you).
User avatar
M-A
Registered user
 
Posts: 36
Joined: Sat May 05, 2012 12:30 am
Location: Madrid - España

Re: How can I activate D8B's Jog/Shuttle to work with PRO TO

Postby angelotaylor » Sat Jan 30, 2021 3:07 pm

M-A wrote:Nobody trying to use Pro Tools and D8B working together?
I'm just surprised that no user has encountered the same problem as me.

I've Pro-Box and it's very nice.
However, from D8D (without Pro-Box) I can command PLAY, STOP, REW, FFW, etc... all except JOG/SHUTTLE.
I don't know if it is due a malfunction problem on my D8B or any other thing missconfigured using JOG/SHUTTLE, like MIDI/MMC/MTC.

Thank you very much and have a blessed day in Christ, too !!


Hello! 2 years from Your las post here. Did You fix Your problem by now?

1. What midi interface do You use?
2. If You use MIDI to USB, what is model/manufacture?
3. Did You try out Jog/Shuttle to windows midi monitor?
4. Some commands can not work with Pro Tools, via Pro Tools version.

I have Pro Tools MIX TDM system, I will try all of it and repot for the result here!

Cheers!
angelotaylor
Registered user
 
Posts: 104
Joined: Sun Jul 26, 2020 9:21 pm

Next

Return to d8b Forum

Who is online

Users browsing this forum: No registered users and 5 guests