24 bit mix back to daw?

[Creative69]

Is at all possisible to print a 24 bit stereo mix back to daw? If so how are you guys doing it?
I'm Using 8 adat channels from the computer but I haven't found a way to send the stereo mix back through two of the channels, I could do this on my yamaha dm1000. As the digital IO card puts out 16 bits I'm stumped.

[Crash]

As the digital IO card puts out 16 bits I'm stumped.

Which I/O card are you talking about? Are you talking about the computer I/O? The console I/O is 24 bit.

[Creative69]

As the digital IO card puts out 16 bits I'm stumped.

Which I/O card are you talking about? Are you talking about the computer I/O? The console I/O is 24 bit.

Hi crash

Was referring to the spdif out. But it seems reading the manual can actually confuse things. It appears to be 20 bit on input and 24 bit on output if I'm understanding it correctly. I originally thought spdif was truncated / dithered to suit dat machines of the day.
I record the main mix back to the daw as a 24 bit file for master.

[Crash]

That is correct, you should be able to get 24 bit out to your DAW.

From the database:

The factory AES and SPDIF digital inputs on all d8bs are limited to twenty bits. The remaining bits of a 24 bit signal will be truncated.


Further, all incoming audio will be subject to sample rate conversion to the current d8b setting, even if it is consistent.


The reasoning for this was to provide a convenient connection for 16 bit DAT recorders and CD players widely in use at the time of the d8b’s design.


These inputs cannot be directly routed to tape outputs or to busses, auxes or DSP. The workaround is to pre-DSP insert the selected digital input to a pair (normally linked) of channels 1-48, allowing assignment to tape outs, busses, auxes, and application of plugins, channel EQ and dynamics.


The only way to input a 24 bit digital signal to the d8b is through one of the digital cards (OPT, DIO, PDI) in one of the I/O slots.


The stock AES and SPDIF digital outputs are 24 bits.