For Sale: Apogee Word Clock Card and others

Discussion board to sell and buy your gear
User avatar
Premium Member
Premium Member
Posts: 342
Joined: Mon Aug 31, 2009 10:51 pm
Location: Texas
PostPosted: Mon Jan 25, 2016 6:52 pm
Apogee Word Clock Card - $300.00

3 DIO-8 Adat Cards - $50.00 each

3 Fader boards - $75.00 Each


Free Shipping in the USA, all others pay actual shipping cost.

email me:

renownedsoundproductions(at)gmail(dot)com

Thanks,

-Casey
d8b V3 into RME HDSP 9652 with Cubase 7.5
User avatar
Site Admin
Site Admin
Posts: 550
Joined: Fri Nov 21, 2008 5:25 pm
Location: Marbella - Spain
PostPosted: Wed Feb 17, 2016 9:02 pm
Hey Casey.

Would you send those fader boards to Spain for me? Also, are the boards in good working condition? Are there many faders un-responsive?
SonOasis
Music Production Studio

Moderator
Moderator
Posts: 439
Joined: Fri Apr 04, 2014 8:10 am
Location: EU
PostPosted: Fri Feb 19, 2016 5:06 pm
Hi Peter

if you have Problems with the faders you can Change them with this replacement
http://www.thomann.de/at/yamaha_ls_901v ... r_217133_0
User avatar
Site Admin
Site Admin
Posts: 550
Joined: Fri Nov 21, 2008 5:25 pm
Location: Marbella - Spain
PostPosted: Fri Feb 19, 2016 8:14 pm
Thanks for the link. Will think about it.

It will be much more easier for me to replace the whole boards instead of getting into soldering new ones. That's why I asked if the faders were good on your boards. And my console have at least 8-10 faders misbehaving, so I would rather buy the boards from you if they are good.

Cheers.
Peter.
SonOasis
Music Production Studio
User avatar
Premium Member
Premium Member
Posts: 342
Joined: Mon Aug 31, 2009 10:51 pm
Location: Texas
PostPosted: Mon Apr 11, 2016 1:45 am
Petersueco wrote:Thanks for the link. Will think about it.

It will be much more easier for me to replace the whole boards instead of getting into soldering new ones. That's why I asked if the faders were good on your boards. And my console have at least 8-10 faders misbehaving, so I would rather buy the boards from you if they are good.

Cheers.
Peter.



Peter,

Just now seeing this post. the 2 8ch boards I have do have issues with the first fader sticking and acting crazy. And as much as I would love to sell these things i worry that the cost of shipping two of these to your side of the globe on top of the cost of boards would be way more than just buying the spares and taking an afternoon replacing the bad faders with new ones. But, it's entirely up to you. Email me for quicker response time.

-Casey
d8b V3 into RME HDSP 9652 with Cubase 7.5

Moderator
Moderator
Posts: 439
Joined: Fri Apr 04, 2014 8:10 am
Location: EU
PostPosted: Thu Apr 14, 2016 7:36 pm
Hi Peter

I can offer you to change the faders of your boards. You just need to send me the boards and replacement faders to Austria. Mark which faders should be changed. Costs (exclusive faders) 2 Euro per fader
best regards

Premium Member
Premium Member
Posts: 423
Joined: Tue Mar 15, 2011 12:02 am
Location: Neustadt, Ontario, Canada
PostPosted: Fri Apr 15, 2016 10:26 pm
Hi Guys;

Just asking.. but are you sure it is the fader and not the CHIP that controls the fader?

Just a thought.

Cheers
Bruce
User avatar
Site Admin
Site Admin
Posts: 550
Joined: Fri Nov 21, 2008 5:25 pm
Location: Marbella - Spain
PostPosted: Thu Apr 21, 2016 8:39 pm
Sorry guys for answering so late to your posts. I have to confess that I don't visit the For Sale forum as often as I should.

@ Casey: It's OK. I will probably end up buying spare faders and solder them.

@ Muckustrap: I'm pretty sure I can manage myself or get someone locally to solder the faders. Thanks you very much for the offer though.

@ Bruce. Well that is something to have in mind but given the age of my console I believe it is the faders that are bad.
SonOasis
Music Production Studio
User avatar
Premium Member
Premium Member
Posts: 227
Joined: Fri Mar 22, 2013 3:33 pm
Location: Marietta 30062, GA, United States
PostPosted: Fri Apr 22, 2016 2:55 pm
Petersueco wrote:@ Casey: It's OK. I will probably end up buying spare faders and solder them.


Peter... the faders are a piece of cake to R-n-R as long as you have basic soldering skillz. A few allen heads screws and a cable to get the board(s) loose and removed, unsolder/resolder 5 joints per fader being extracted and replaced, button it back up and your done. All in all, it's just being pragmatic, patient and careful.

I'd recommend get a 'solder-sucker' - NOT a bulb or braid - for unsoldering purposes. Inexpensive, and will do a MUCH better job of removal and not leaving a mess.

http://www.amazon.com/Elenco-Solder-Sucker-desoldering-pump/dp/B0002KRAAG

I would also highly recommend using (63/37 alloy mix) eutectic solder too, it cools quicker than the 60/40 'normal' mix. So what's the benefit? MUCH less chance of cold solder joints developing due to quicker cooling after the iron is removed from the soldered joint. I just replaced two of mine over the weekend, took all of 25 minutes or so from removal to reinstall...

However, as always, you knew it was coming so here it is :
[Standard Mgmt Disclaimer] - "Your Actual Mileage May Vary..."

Peace
--
Dok

"Too many guitars is just about right..." - [Anonymous Player]
User avatar
Premium Member
Premium Member
Posts: 1052
Joined: Fri Nov 21, 2008 9:36 pm
Location: Down under or up over, depending on where in space you are.
PostPosted: Mon Apr 25, 2016 3:31 am
Gee. Where have I been? Didn't even know this page existed.

Peter
In the scheme of things, there isn't one... just chaos.
Next

Return to For Sale

Who is online

Users browsing this forum: No registered users and 1 guest

cron