Change font size   Print view

The audio in/out

Discussion board for ProBox users

The audio in/out

Postby the boss » Thu Dec 18, 2014 1:25 am

Hi

How about the audio in hui mode
Is there a way to make it work or is it working?
If not, is there a workoraund?

Is it going to be implemented later on?

Thanks
the boss
Registered user
 
Posts: 144
Joined: Fri Feb 07, 2014 6:45 pm

Re: The audio in/out

Postby munkustrap » Thu Dec 18, 2014 8:46 am

Hi

basically I have to say that I have no focus on Audio (I also cannot test it as I do not have a CPU) but I can imagine that it works. I added some new functions in the new Firmware that should allow that you do your Audio Setting with the mackie CPU and your remote with the DAW. But you will Need for that a Special Adapter. The Console has two Serial Connections. One for the DSP/Audio-IN-Outs/Routing and one for the Buttons/Faders/vpots/Controlroom-Audio.
These two Interfaces are sitting on one connector (the 25pol Sub D) So you have to split that and feed the DSP Interface to your CPU and the control Interface to the probox. The probox now can operate with a non hacked Firmware, so it should work with all internal communications in the console (hopefully including cards).
You can also disable the metering comming from the DAW to ensure that your DAW doesn't mix up the meterbridge with the DSP commands.

But that is all theoretical and must be tested. Maybe I fiind some time and a way how somebody on the Forum that owns a probox and a cpu can build up that Special Y-cable to try this stuff.
munkustrap
Moderator
Moderator
 
Posts: 464
Joined: Fri Apr 04, 2014 8:10 am
Location: EU

Re: The audio in/out

Postby the boss » Thu Dec 18, 2014 3:54 pm

I will soon sign up for the probox.
If somebody can tell me the cable modification, i will be able to give it a try.
I have two d8b´s fully working in a network and have some good electrical skills.
My studio is pretty large and i have built the hole thing by my self and made some bigger modifications on my Tascam M600 console like remote talkback, diode mods ... and all the fan, hd and so on to my d8b consoles.

If i can be at any help by testing some cable mods when i get my probox.

Just let me know...:)
the boss
Registered user
 
Posts: 144
Joined: Fri Feb 07, 2014 6:45 pm

Re: The audio in/out

Postby munkustrap » Fri Dec 19, 2014 3:01 pm

Hi boss
that sounds good. I try to make a document for the cable the next days.
but tomorrow and sunday I have to work in the studio, so it might take a bit.
best regards
Munk
munkustrap
Moderator
Moderator
 
Posts: 464
Joined: Fri Apr 04, 2014 8:10 am
Location: EU

Re: The audio in/out

Postby the boss » Sat Dec 20, 2014 1:51 pm

Hi

Sounds perfect :)
the boss
Registered user
 
Posts: 144
Joined: Fri Feb 07, 2014 6:45 pm

Re: The audio in/out

Postby the boss » Tue Dec 30, 2014 9:00 pm

Hi

Now i have ordered my pro box
And bought boards and switch so I easy can make a db 25 configuration to test what's to work so we can use probox with audio.
So munk please send me the configuration you think will work so I can test it and maybe work out a solution....
the boss
Registered user
 
Posts: 144
Joined: Fri Feb 07, 2014 6:45 pm

Re: The audio in/out

Postby ismains » Tue Feb 17, 2015 3:50 pm

hi everyones

is there any devellopment on this ??? this would be the best thing to add up with the probox
no moere need to swap the cpu for audio and the probox for surface control

keep us updated

thanks

best regards
ismains
Registered user
 
Posts: 36
Joined: Tue Jul 30, 2013 6:34 pm

Re: The audio in/out

Postby the boss » Tue Feb 17, 2015 4:35 pm

Hi

If you connect the probox with a serial switch and run probox at normal speed you can use the audio and then switch over without reboot to use pro box.

I've talked to munk and it is possible that an update will be able with a reset function later on because there is a small issue when you switch from probox back to d8b.
You'll have to move the faders and decoders to get them updated....

Best regards
the boss
Registered user
 
Posts: 144
Joined: Fri Feb 07, 2014 6:45 pm

Re: The audio in/out

Postby ismains » Tue Feb 17, 2015 7:27 pm

thank you very much The boss
i will get myself a db 25 switch box and try that out
and see what are the issue..i will be sharing my experiment here

best regards

Alain
ismains
Registered user
 
Posts: 36
Joined: Tue Jul 30, 2013 6:34 pm

Re: The audio in/out

Postby munkustrap » Wed Feb 18, 2015 1:37 pm

Thanks Alain for the future investigations.

best regards
munkustrap
Moderator
Moderator
 
Posts: 464
Joined: Fri Apr 04, 2014 8:10 am
Location: EU

Next

Return to ProBox

Who is online

Users browsing this forum: No registered users and 4 guests

cron