Change font size   Print view

Status : console ready. Waiting for MCU Init

Discussion board for the D8Bridge users

Re: Status : console ready. Waiting for MCU Init

Postby bitSync » Fri Feb 01, 2013 6:17 am

farmac wrote:If I use the 32 bit D8Bridge , do I use (Midiyoke) or Midiloop , with my cubase7 64bit , 64 OS ?


Don't try to use Midiyoke with an x64 OS; it won't go well. Use either LoopMIDI or LoopBE30 with an x64 OS. The MIDI virtual port software (32 bit or 64 bit) is an OS thing, not a D8Bridge thing, not a DAW thing. Your LoopMIDI or LoopBE30 will get along just fine with your 32 bit d8bridge.exe and your 64 bit DAW on your 64 bit OS.
Win7 Pro x64 SP1 / SONAR 2016 Platinum x64 Newburyport / 2x Mackie d8b 5.1 + (D8Bridge v1.1 x32 or ProBox) / 3.20 GHz Intel i7 950, 24 GB DDR3 RAM, 2TB SATA3 SSD / RME HDSP9652 PCI (ASIO) / RME ADI-8 QS / New Belgium 1554
User avatar
bitSync
Premium Member
Premium Member
 
Posts: 381
Joined: Sat Dec 13, 2008 4:01 pm
Location: Baltimore, MD, USA

Re: Status : console ready. Waiting for MCU Init

Postby farmac » Fri Feb 01, 2013 3:20 pm

Yes. Marc emailed me to try the 32 bit version as well , which is listed beside the 64 bit version in the archive.

I could probably clean up the Quick and Dirty instructions a bit , now that I've stumbled through them.

I'm going to try and work on my D8b and Cubase some more tonight. I've got to LEARN Cubase , and LEARN the new mapping of the D8b as well. In a quick start last night ; without looking at the map , the buttons on the D8b REALLY facilitate the navigation thru the functions of Cubase.
farmac
Registered user
 
Posts: 44
Joined: Wed Mar 11, 2009 12:44 am

Re: Status : console ready. Waiting for MCU Init

Postby farmac » Fri Feb 01, 2013 3:35 pm

I also found when creating ports in Loopmidi , not to bother writing " in from 1 , or out from 2 " etc. just Loopmidi port 1 , and so on.
If you read the directions describing the procedure for setting this up , and entering the info into the other MCU controllers as opposite , the directions show in's that were labelled out's ( when you created them ) and reverse ? - and this is of course not possible. Just labeling them port 1,2,3,..... and then entering reverse order and MCU order - Worked for me.
farmac
Registered user
 
Posts: 44
Joined: Wed Mar 11, 2009 12:44 am

Previous

Return to D8Bridge Forum

Who is online

Users browsing this forum: No registered users and 7 guests

cron