Change font size   Print view

Pans

Discussion board for the D8Bridge users

Pans

Postby mnewman49 » Thu Jan 26, 2012 4:41 am

D8b was freezing so I dove in and cleaned all ribbon connectors and pulled all cards and cleaned and reinstalled. Bord work fine. No more freezing. Now I have no pans. They light up and look normal but when rotated, they do nothing... Help!!!
Thanks, Michael Newman 409 466 1741
mnewman49@gmail.com
mnewman49
Registered user
 
Posts: 4
Joined: Thu Jan 26, 2012 12:10 am

Re: Pans

Postby synthjoe » Thu Jan 26, 2012 12:45 pm

Do the ribbon cable procedure again, check carefully for bent pins!
If all else works fine that should do it. Maybe double-check power harnesses (including the BFC), even though if faders 'fly' then power should be fine to the V-pot sensing, too...
synthjoe
Premium Member
Premium Member
 
Posts: 235
Joined: Mon May 02, 2011 12:12 pm

Re: Pans

Postby mnewman49 » Thu Jan 26, 2012 10:46 pm

Thanks ,I will give it another try...
mnewman49
Registered user
 
Posts: 4
Joined: Thu Jan 26, 2012 12:10 am


Return to D8Bridge Forum

Who is online

Users browsing this forum: No registered users and 13 guests

cron