Change font size   Print view

Cakewalk to Publish Sonar X Mackie Control Surface!

Discussion board for the D8Bridge users

Cakewalk to Publish Sonar X Mackie Control Surface!

Postby bitSync » Sun Dec 15, 2013 8:42 pm

Cakewalk is planning to publish the Sonar X Mackie control surface as well as a API for access to the more esoteric features of the user interface. Pretty cool.

http://forum.cakewalk.com/Mackie-Contro ... 08006.aspx
Win7 Pro x64 SP1 / SONAR 2016 Platinum x64 Newburyport / 2x Mackie d8b 5.1 + (D8Bridge v1.1 x32 or ProBox) / 3.20 GHz Intel i7 950, 24 GB DDR3 RAM, 2TB SATA3 SSD / RME HDSP9652 PCI (ASIO) / RME ADI-8 QS / New Belgium 1554
User avatar
bitSync
Premium Member
Premium Member
 
Posts: 381
Joined: Sat Dec 13, 2008 4:01 pm
Location: Baltimore, MD, USA

Re: Cakewalk to Publish Sonar X Mackie Control Surface!

Postby Marc Girard » Mon Dec 16, 2013 6:11 am

Very cool, I tried to get in touch with Mackie, even had an address for higher management, NOBODY knows anything about the MCU protocol documentation, I wonder how the folks at Steinberg at others had access to the official Mackie documentatiion... If Sonar can help it, that's great news!
Marc Girard
Bluaudio.org
http://www.bluaudio.org/d8bridge
User avatar
Marc Girard
Moderator
Moderator
 
Posts: 278
Joined: Wed Oct 13, 2010 5:26 am

Re: Cakewalk to Publish Sonar X Mackie Control Surface!

Postby bitSync » Wed Dec 18, 2013 6:10 am

Marc Girard wrote:Very cool, I tried to get in touch with Mackie, even had an address for higher management, NOBODY knows anything about the MCU protocol documentation, I wonder how the folks at Steinberg at others had access to the official Mackie documentatiion... If Sonar can help it, that's great news!


As I understand it, builders of DAWs (Steinberg, etc.) who wanted a tight interface with the MCP engaged with Mackie management and if Mackie felt it was in their best interests (i.e., non-competitive with their MCU) then the DAW builder would enter into a nondisclosure agreement (NDA) with Mackie and then get the MCP specification so their DAW fully supported the MCU. But if you were building something that competes with the MCU (like another controller), the only way you were going learn about the MCP was to sniff it and document it. This leaves a little bit of mystery in the interface, mostly at initialization, relegating builders of competing interfaces to using an incomplete (sniffed) specification.

The Logic Control protocol is pretty close to MCP, but not identical. I'm anxious to see how Cakewalk are going to publish this without bumping into their NDA with Mackie. But if they do publish it this may help refine the D8Bridge initialization with the MCP and hopefully resolve any lingering interface secrets.
Win7 Pro x64 SP1 / SONAR 2016 Platinum x64 Newburyport / 2x Mackie d8b 5.1 + (D8Bridge v1.1 x32 or ProBox) / 3.20 GHz Intel i7 950, 24 GB DDR3 RAM, 2TB SATA3 SSD / RME HDSP9652 PCI (ASIO) / RME ADI-8 QS / New Belgium 1554
User avatar
bitSync
Premium Member
Premium Member
 
Posts: 381
Joined: Sat Dec 13, 2008 4:01 pm
Location: Baltimore, MD, USA

Re: Cakewalk to Publish Sonar X Mackie Control Surface!

Postby bitSync » Sun Feb 23, 2014 4:57 pm

Just announced by Cakewalk -

http://forum.cakewalk.com/FindPost/2993349

There's another thread in here on the same topic -

http://www.d8bforum.com/phpBB3/viewtopic.php?f=6&t=1109
Win7 Pro x64 SP1 / SONAR 2016 Platinum x64 Newburyport / 2x Mackie d8b 5.1 + (D8Bridge v1.1 x32 or ProBox) / 3.20 GHz Intel i7 950, 24 GB DDR3 RAM, 2TB SATA3 SSD / RME HDSP9652 PCI (ASIO) / RME ADI-8 QS / New Belgium 1554
User avatar
bitSync
Premium Member
Premium Member
 
Posts: 381
Joined: Sat Dec 13, 2008 4:01 pm
Location: Baltimore, MD, USA

Re: Cakewalk to Publish Sonar X Mackie Control Surface!

Postby bitSync » Fri Mar 28, 2014 10:11 pm

Win7 Pro x64 SP1 / SONAR 2016 Platinum x64 Newburyport / 2x Mackie d8b 5.1 + (D8Bridge v1.1 x32 or ProBox) / 3.20 GHz Intel i7 950, 24 GB DDR3 RAM, 2TB SATA3 SSD / RME HDSP9652 PCI (ASIO) / RME ADI-8 QS / New Belgium 1554
User avatar
bitSync
Premium Member
Premium Member
 
Posts: 381
Joined: Sat Dec 13, 2008 4:01 pm
Location: Baltimore, MD, USA


Return to D8Bridge Forum

Who is online

Users browsing this forum: No registered users and 6 guests