Page 1 of 2
sync problem with a motu 2408 mk3
Posted:
Thu Dec 06, 2012 3:07 amby bastafuerte
Hello recently i begin having problems when i reboot the desk it flashes and i need remove the apogee card to restart the console
I have 3 dio cards 1 analog card and apogee clock card-
then i have a motu 2408 mk3 and i using nuendo 3
Which is the conections for best result ?
Thanks
Re: sync problem with a motu 2408 mk3
Posted:
Wed Dec 12, 2012 10:06 amby FrankH
This is a little hard to understand and probably the reason why there haven't been any replies. What is your native language?
Re: sync problem with a motu 2408 mk3
Posted:
Wed Dec 12, 2012 4:24 pmby bastafuerte
Im sorry i am from argentina and my english is bad. . The question is how would be the best Connection and setup between the board and the motu 2408 mk3.
In the board i have 3 dio cards, 1 analog card. 4 mfx cards. 1 apogee sync card.
Thanks
Re: sync problem with a motu 2408 mk3
Posted:
Wed Dec 12, 2012 10:44 pmby Petersueco
Hola Bastafuerte.
La mejor opción que tienes es conectar la d8b con la Motu utilizando los conectores de fibra óptica ADAT. También es recomendable que conectes la salida de WordClock de la Motu con la de la Apogee Clock Card.
Yo normalmente pongo la d8b como Interna/Master y el DAW en External/Slave. Asegurate de tener el mismo SampleRate en la mesa y en el DAW.
¡Suerte!
Peter Holmquist.
Re: sync problem with a motu 2408 mk3
Posted:
Wed Dec 12, 2012 11:35 pmby garrett21allen
Hi everyone
I think peter just said he was going to buy us all
something for christmas this year. thanks peter.
joe allen
Re: sync problem with a motu 2408 mk3
Posted:
Thu Dec 13, 2012 11:02 pmby Petersueco
garrett21allen wrote:Hi everyone
I think peter just said he was going to buy us all
something for christmas this year. thanks peter.
joe allen
You nailed it, Joe!
Re: sync problem with a motu 2408 mk3
Posted:
Thu Dec 13, 2012 11:51 pmby bastafuerte
Ok thanks. Another question is How i put the clock source in the motu console. 2408mk3 word clock or 2408 mk3 bank b optical or another ?
Thanks
Re: sync problem with a motu 2408 mk3
Posted:
Thu Dec 13, 2012 11:56 pmby bastafuerte
I conect the word clock in on the motu with the out of the apogee card . Is this good?
Thanks
Re: sync problem with a motu 2408 mk3
Posted:
Fri Dec 14, 2012 2:19 amby Petersueco
- connect.jpg (Array KiB) Viewed 2638 times
(From the Mackie Hook Up Guide - Page 8).Connect it like this and you should be in business. Just replace the HDR24/96 by your MOTU equivalent connector.
Peter Holmquist.
Re: sync problem with a motu 2408 mk3
Posted:
Fri Dec 14, 2012 8:44 amby FrankH
I think this illustration will make more sense to Bastafuerte as it is specific to his setup.
