Re: Error 43:DSP Control Card not ready, Boot Fail
Posted: Wed Jan 04, 2012 7:13 am
Fixed it!! Yahooooo! I have to go with a split decision on the "Save" synthjoe was right on the money with the where to look "comms" post. But Steve at S&X pretty much nailed it when he said, "There's a real good chance you've got the two com ribbons switched. For future ref. The top half of the serial ribbon (inside the cpu) goes to the com 2 pins which is at the back of the cpu the bottom half of the serial ribbon goes to com1. Got full 5.1 load mouse, keyboard everything. Now I have to go find a 250 w or better psu to replace the dead sparkle. Thanks for the help Joe. Good call on the coms ports.