Change font size   Print view

EffectBus Question

Discussion board for Mackie's d8b Digital Console users.

EffectBus Question

Postby captainamerica » Wed Apr 14, 2021 2:55 am

Refresh time:

I dont use the EFFECTS bus but notice ch 9/10 active and have no idea the routing process. Any ideas where this is coming from?
Attachments
Screen Shot 2021-04-13 at 8.54.25 PM.png
Screen Shot 2021-04-13 at 8.54.25 PM.png (Array KiB) Viewed 1276 times
DAW: Genelec 8341,MacStudio, QuantumTB, Faderport16, DP, LogicProX, ProTools.BackupDAW:d8B, MacPro 2008 2xQuad-Core, MOTU (2408)LegacyDAW: A2000, Picasso II, Blizzard 68060@50 MHz|3xAD516 SunRize cards|HydraNexus Amiganet Ethernet.
User avatar
captainamerica
Premium Member
Premium Member
 
Posts: 338
Joined: Thu Nov 27, 2008 5:45 pm
Location: Boston, MA (org. from Montreal, Canada)

Re: EffectBus Question

Postby AustinFa04 » Wed Apr 14, 2021 4:11 am

Did you look to see if you Aux 9-10 v pot is up at all?
Just push Aux 9-10 button and see if any of your channels are getting sent there.
AustinFa04
Registered user
 
Posts: 49
Joined: Mon May 30, 2016 11:28 pm

Re: EffectBus Question

Postby captainamerica » Wed Apr 14, 2021 1:32 pm

No but I did see the Card/Slot for 9/10 reserved for FinalMIX plugin...not sure if this is what I am seeing?
DAW: Genelec 8341,MacStudio, QuantumTB, Faderport16, DP, LogicProX, ProTools.BackupDAW:d8B, MacPro 2008 2xQuad-Core, MOTU (2408)LegacyDAW: A2000, Picasso II, Blizzard 68060@50 MHz|3xAD516 SunRize cards|HydraNexus Amiganet Ethernet.
User avatar
captainamerica
Premium Member
Premium Member
 
Posts: 338
Joined: Thu Nov 27, 2008 5:45 pm
Location: Boston, MA (org. from Montreal, Canada)

Re: EffectBus Question

Postby Phil.c » Wed Apr 14, 2021 2:04 pm

Go to plugins and see what effect if any are assigned.
User avatar
Phil.c
Premium Member
Premium Member
 
Posts: 1114
Joined: Sun Nov 23, 2008 10:58 pm
Location: South Wales

Re: EffectBus Question

Postby captainamerica » Thu Apr 15, 2021 1:36 am

Ok, Phil I think I see the issue

The input source is set to Card/Slot 9 and 10, and it looks like I have this assigned to Pre DSP Insert with 2 ch going into Final Mix
I know there was a reason for this workflow setup but can't remember why :(
DAW: Genelec 8341,MacStudio, QuantumTB, Faderport16, DP, LogicProX, ProTools.BackupDAW:d8B, MacPro 2008 2xQuad-Core, MOTU (2408)LegacyDAW: A2000, Picasso II, Blizzard 68060@50 MHz|3xAD516 SunRize cards|HydraNexus Amiganet Ethernet.
User avatar
captainamerica
Premium Member
Premium Member
 
Posts: 338
Joined: Thu Nov 27, 2008 5:45 pm
Location: Boston, MA (org. from Montreal, Canada)


Return to d8b Forum

Who is online

Users browsing this forum: No registered users and 10 guests

cron