D8B License Key problem

[Jan]

Hi
I have problem with my Mackie d8b
After changing the battery of BIOS I lost my licence key
and mixer start in Demo Mode.
It is important for me to have fully functional computer / mixer.
The version of software 5.1
I need help with that.

[Crash]

This is from the 5.1 crack thread on here. See if this get ya down the road. This is one of many threads on 18 pages of info, so you may want to search "5.1 Crack" to find the thread and see if there is more stuff. I am pretty sure Munk got to a point where all the plugs were unlocked along with 5.1.

Hi Guys

here is the link:
https://www.dropbox.com/s/cwity8t7dawlc ... e.zip?dl=0
maybe you have to press the button "Herunterladen"

1. Install OS5.1
2. overwrite existing control.asc with the new one on your mackie mcu (via FTP, see d8b databse for more informations).
3. use the codes in the txt file.

please note:
You will get a new ESN for your System, so all plugin codes you have used before will not work anymore !
Bitsync figured out that some plugins are not working. Hopefully we will find the reason for that.
check his post to see what is working at the Moment.
Maybe these issues are due to UFX and MFX Cards ?

OS 5.1 - Authorized

RTA-31 v1.0 Build 53 - Authorized
Saturated Fat v1.0 Build 54 - Authorized
Mono Delay v1.0 Build 52 - Authorized
MDW Stereo EQ v1.0 Build 52 - Authorized
Vocal Studio v3.0 Build 52 - Locked, no unlock code
TC Level 1 v1.0 Build 52 - Locked, no unlock code
TimePak v1.0 Build 52 - Locked, 2 attempts
Antares Autotune v1.1 Build 56 - Authorized
Drawmer Dynamics Mono V1.0 Buil... - Locked, 2 attempts
Drawmer Dynamics Stereo v1.0 Bu... - Authorized
DSR-1 v1.0 Build 25 - Authorized
Delay Factor v1.0 Build 52 - Authorized
MDW Mono EQ v1.0 Build 52 - Authorized
Final Mix v1.0 Build 25 - Authorized
FIlter Machine v1.0 Build 52 - Locked, 2 attempts
Mackie Effects v3.0 Build 52 - Authorized - no unlock required
Acuma Pro Audio Lab - plugin not installed
TC Electronic MDW 2x2 - plugin not installed

I also want to mention that there was a third person that offered the serials for that hack.
thank you very much !!! Without that it would not be possible ! I will not name him, he will respond if he wants

btw: I can make the new Firmware with any ESN you like, so if we have another ESN with more plugins enabled I can make a Firmware for that ESN.

have fun
Munk

[Jan]

Thank you very much for your help

[angelotaylor]

here is the link:
https://www.dropbox.com/s/cwity8t7dawlc ... e.zip?dl=0

Hello, Gentleman's!

Link to download - is not working, can You renew the link again? Somebody have a full plugins pack (with TC pack)? Were I can download this?

[Jondav1120]

Hi Angelo,

Try this link.
That should work, the link you have is incomplete.

Regards

John

[angelotaylor]

Hi Angelo,

Try this link.
That should work, the link you have is incomplete.

Regards

John

Thank You very much!

[THARYDE]

Hey everyone. I’m new here. I just got an old, but unused (for the most part) Mackie d8b 5.1. Under the licensing tab, I cannot unlock any of the additional plugins. I see someone posted a link showing the codes, but how do I even start the installation? Apparently the Mackie needs to be reset with a different ESN number, I have no idea on how to go about doing this… I looked on YouTube, but finding a “how to” tutorial regarding a 20 year old mixer is unlikely to happen. Please help if you can. Thanks
Ryde

[Y-my-R]

This post has an attachment on it:

viewtopic.php?f=2&t=1634&hilit=crack&start=150

Download the attachment.

There's a file named "MackieOS.exe" in it. Find the file with the same name on the harddrive in your D8B rack unit, and replace it with the file found in the attachment from that post.

There's various ways to go about this... one of them is to remove the D8B harddrive and connecting it to a PC and replacing the file from there (then installing the drive back into the D8B).

But in principle, the "hack" that gives you all the plug-ins, without having to enter any of the codes, is to replace this file. (The method where you have to enter serial codes, is an older hack... I'd recommend to use the one I'm linking to above, instead).

If you have trouble with replacing the file, post again with a description what you did and where you got stuck (and the exact error message, if there is any). But generally, you just have to find a way to replace that file, and that's that.

Best of luck!