Page 1 of 2
Faders replace
Posted:
Mon Nov 11, 2019 4:05 amby madcarb1
Hello, i have 3 faulty faders, i need to replace them, is there a guide to do it by myself?
I found these on ebay, they should fit ok.
https://www.ebay.it/itm/263494177705?ul_noapp=true
Re: Faders replace
Posted:
Mon Nov 11, 2019 9:44 amby Phil.c
I bought a complete board for less than that, but they're getting hard to find now.
The easiest way to remove the faders is with a solder pump because of the multiple connectors.
Re: Faders replace
Posted:
Tue Nov 12, 2019 10:25 pmby Jondav1120
Hi, I think the D8B uses faders with slightly different mounting points to the ones that you have linked to. From memory, they are more like these
https://www.ebay.co.uk/itm/ALPS-slide-potentiometer-motorized-RSAON11M9-touch-sensitive-DIPPING-pot-100mm/261902626106?hash=item3cfa9ced3a:g:pQ0AAOxy~g5Ro6PBYou may also need to crop the pin that feeds the touch sensitivity track.
Regards
John
Re: Faders replace
Posted:
Sat Nov 30, 2019 1:02 pmby madcarb1
Thanks i try to buy one and install it, hope it works
Re: Faders replace
Posted:
Sat Nov 30, 2019 6:22 pmby Phil.c
Check for burnt out caps first!
Re: Faders replace
Posted:
Thu Jan 02, 2020 2:11 pmby Crash
You may have gotten this sussed out by now but I just stumbled across two 8 fader boards and one 9 fader board that were in my d8b box that look to never have been installed in a console. They are in anti static bags still but I can make no claim as to what the operational condition is after all this time, but I got 'em if anyone wants to take a chance. I have decomissioned my d8b with mixed feelings and found these when I got the box out to store the console.
Re: Faders replace
Posted:
Sun Jan 05, 2020 6:35 amby Bruce Graham
Hey Crash;
Sad to hear your d8b has been decommissioned. I guess we will all face that at some point.
Hope you drop in from time to time.
Thanks for all your insight and advice and the great Avatar!
Cheer
Bruce
Re: Faders replace
Posted:
Sun Jan 05, 2020 12:24 pmby Phil.c
Wish I knew about your fader banks about six months ago I bought one from a guy in the USA known on this forum, I had hassle as it didn't work! But up and running again now.
Re: Faders replace
Posted:
Mon Jan 06, 2020 2:06 pmby Crash
I had mixed emotions about taking the d8b out. It still works, never gave me issue but I got a stupid deal on a dxb that intrigued me. It needed a bit of work but I got it up and running and with the "Grado" upgrade (The guy that inherited the software after Bob passed) to software, it just makes my work flow easier. You can patch anything anywhere, which works out for me in terms of outboard, which I have fair bit. I am losing some of the cool d8b plugins but I can run VST plugs on this console.
I didn't even remember that I had these extra fader banks until I got the box out for the d8b. They probably work but hard to say this many years down the road. I am guessing they are new old stock from when I built the console. I got em if someone get in a bind.
Re: Faders replace
Posted:
Sat Jan 11, 2020 2:19 pmby madcarb1
Crash wrote:I had mixed emotions about taking the d8b out. It still works, never gave me issue but I got a stupid deal on a dxb that intrigued me. It needed a bit of work but I got it up and running and with the "Grado" upgrade (The guy that inherited the software after Bob passed) to software, it just makes my work flow easier. You can patch anything anywhere, which works out for me in terms of outboard, which I have fair bit. I am losing some of the cool d8b plugins but I can run VST plugs on this console.
I didn't even remember that I had these extra fader banks until I got the box out for the d8b. They probably work but hard to say this many years down the road. I am guessing they are new old stock from when I built the console. I got em if someone get in a bind.
i wrote you a pm fr the fader boards, thanks