Change font size   Print view

Mackie D8B

Discussion board for Mackie's d8b Digital Console users.

Mackie D8B

Postby Stamma2 » Thu Feb 08, 2018 1:24 am

When i turn on my Mackie d8b all lights on the board start flashing and a loud popping noise coming from the speakers, pop pop pop pop pop ! ! ! !. When i loosen the CPU cable slightly and screw it back in the popping stop. Help
Registered user
Posts: 1
Joined: Thu Feb 08, 2018 12:20 am

Re: Mackie D8B

Postby lyn69 » Thu Feb 08, 2018 1:45 am

Unscrew the BFC and spray the contacts with servisol and replace BFC tightly. Make sure there is no strain on the cable and it should be fine. I get this problem from time to time if I move the desk.
Registered user
Posts: 30
Joined: Fri May 29, 2015 12:48 pm

Re: Mackie D8B

Postby captainamerica » Wed Feb 14, 2018 8:09 pm

there are TONS of articles around this issue on this site itself..suggest you also look at FAQ on Ribbon Cable Connection Correction Procedure
MainDAW: d8B, 4xMackie ContrSurface. 2xQuad-Core, MOTU (DP, 2408, MTP/AV,Mach5, Symphonic) LogicProX, ProTools. Final Cut Pro, LINUX and Csound.
LegacyFoleyDAW: Amiga2000: OS3.9|Picasso II|Blizzard 68060@50 MHz|3xAD516 Sunrize cards|Inet-225|
User avatar
Premium Member
Premium Member
Posts: 110
Joined: Thu Nov 27, 2008 5:45 pm
Location: Bolton, MA, USA (org. Montreal Canada)

Return to d8b Forum

Who is online

Users browsing this forum: No registered users and 1 guest