Change font size   Print view

console power down

Discussion board for Mackie's d8b Digital Console users.

console power down

Postby chadallan » Sat Nov 25, 2017 2:57 pm

Hi all, Ive just after several months managed to find a CPU, everything boots up mixer and monitor all work fine, then aftyer 5 mins or so all of the console except the digital display shuts down, rude light comes on, the monitor works fine and selects between 1-4 stages, any ideas....ive taken off and replaced every power plug and fuse to the cpu board I can find. Switch off and fine again for another 5 mins.........
chadallan
Registered user
 
Posts: 8
Joined: Fri Feb 17, 2017 9:24 pm
Location: Newcastle upon tyne, United Kingdom

Re: console power down

Postby Bruce Graham » Sat Nov 25, 2017 4:46 pm

Hey Chad;

I am not an expert, but it sounds like a power supply problem. Maybe dried up capacitors?

These beasts are old and these kinds of problems are bound to happen.

Just a thought.

Cheers
Bruce
Bruce Graham
Premium Member
Premium Member
 
Posts: 717
Joined: Tue Mar 15, 2011 12:02 am
Location: Walkerton, Ontario, Canada

Re: console power down

Postby chadallan » Sat Nov 25, 2017 10:21 pm

thanks for that bruce, each time I reboot it freezes at a different part, and literally the faders freeze too! very odd
chadallan
Registered user
 
Posts: 8
Joined: Fri Feb 17, 2017 9:24 pm
Location: Newcastle upon tyne, United Kingdom

Re: console power down

Postby Old School » Sun Nov 26, 2017 2:31 am

Hi,
What version of D8B software are you running? If it's 5.1, have you authorized it?

Have a blessed day in Christ,
Mike W.
Wanna make God laugh, ...Tell Him your plans
User avatar
Old School
Premium Member
Premium Member
 
Posts: 400
Joined: Thu Jun 16, 2011 8:42 pm
Location: Elm City NC

Re: console power down

Postby chadallan » Sun Nov 26, 2017 5:20 pm

Thanks old school, I'm running version 3, I'm going to take the bottom off the mixer next and check connections there, ive already double checked all the bios settings, cheers
chadallan
Registered user
 
Posts: 8
Joined: Fri Feb 17, 2017 9:24 pm
Location: Newcastle upon tyne, United Kingdom

Re: console power down

Postby chadallan » Mon Nov 27, 2017 5:50 pm

Hi all, well I'm celebrating now, after taking the bottom off the console, taking off the power supply ribbons and reinstalling them, the console ran without fail and have tested it with mic's and cd and all is running perfectly. I must say I am extremely impressed with the crispness of the sound........so its a merry xmas for me!! thanks for all your support.
chadallan
Registered user
 
Posts: 8
Joined: Fri Feb 17, 2017 9:24 pm
Location: Newcastle upon tyne, United Kingdom

Re: console power down

Postby Bruce Graham » Tue Nov 28, 2017 4:17 am

Life is good in the d8b world.

Merry Christmas to all and to all a good night. (I know it's a bit early)

Cheers
Bruce
Bruce Graham
Premium Member
Premium Member
 
Posts: 717
Joined: Tue Mar 15, 2011 12:02 am
Location: Walkerton, Ontario, Canada


Return to d8b Forum

Who is online

Users browsing this forum: No registered users and 4 guests

cron