d8b Forum

Hi ýa'll

I have a opcode midi pc card in my CPU exact the same as this one you see all the way, on your right, the last one in the slot

http://cachepe.zzounds.com/media/qualit ... 6d7797.jpg


i have an original Midi cable from mackie, but i still cannot activate the HUI mode , it says HUI MODE ON in yello, but when i press the hui mode , it says hui channel offline, how can i turn it online, i did everything you guys said, like swapping cards, rebooting, battery check, but nothing seems to work, it there any option

i really want to use my d8b as a controller in cubase, using the jog wheel and the 8 faders

You have to add a HUI device in Cubase.

• Go to Devices>Device Setup... The device setup window will pop up.
• Select Remote Devices in the left window.
• Click on the [+] button and add Mackie HUI.
• Now set the MIDI Input and MIDI Output ports to the ones that are connected to you d8b.
• Click Apply and OK.

Now your HUI would be Online.

Peter Holmquist.

TThxxx Peter

I've also done that, but still no responsee, it stayss the same,
i think my Opcode PC MIDI card does not work, but i will still try and fix if this is the only solution to make it online,

thx for the infoo.

Will the D8B chase MTC non-HUI...?

http://forums.mackie.com/scripts/forum/ ... 493#000000

thx guysss for all the help, i found the solution, the brand new mackie midi cable i got, was wired the wrong way, it's a damnnnn shamee, that something is simple as that can give you that kind of headaches, but all is well now, only one thing,

everything works, but the hui channel still is howing OFFLINE

time for a new topic

Do you have timecode display on the d8b and does it track cubase timecode?

Peter

Hi Peter

I have no timecode on the display, in HUI mode it turns off. and the display above, near the level meters it still says HUI CHANNEL offline, but everything works properly . you have any ideas?

If you have no timecode on the d8b display, one or both of two things will be the problem.

1. You haven't enabled the transmission of Midi Time Code (MTC) in Cubase

and/or

2. Your Opcode device doesn't recognize MTC and therefore doesn't transmit or more correctly, pass it thru to the d8b.

Peter

BTW, if that's an Opcode MIDI card in the d8b, I'm surprised it works at all given that the driver in the software is for a Winman 1x1.

What device are you using on your computer where Cubase resides to deal with MIDI?

Peter

thxx peterr,

i pulled out the midi card, and is said OPCODE PC MIDI card,

i have attachted it thru MIDI IN MIDI OUT to an AUDIOPHILE 2496 card

http://www.m-audio.com/products/en_us/A ... e2496.html

everything works exept for the HUI channel to go ONLINE,

im running cubase SX . so that is my setup ..

still trying to work out all the info you gave me, still no luck