d8b Forum

Hi,

Sometimes when i boot my d8b the keyboard and mouse won´t be recognized and sometimes it will.
please help me!

I have two d8b´s and one of them work like a charm.

If it has been recognized after boot it will work for an hour or so, but then it freeze.

What seems to be the problem?


Please help!

Have you tried switching between the sketchy unit and the good unit to see if the problem follows?

Hi
Thanks for the Quick response.....
Yes, and no problem....
Tried to switch keyboard and mouse and the problem still exist....
I Think it´s somewhere in the cpu unit, but i can´t find it.
Tried to change the ram and no!
500 MB
Maybe it´s too much?

If I recall correctly at the moment, the most RAM that the CPU will recognize is 256 meg but I can't imagine that having too much would cause you this issue. In fact, I think you can cram as much as you can get in there and it just won't see anything over the 256megs. I am not sure what to tell you to try next.

Hi

My problem is solved...
For them who have the same problem with
Keyboard and mouse frozen.
Replace the ps2 port on your psu.
They are available on eBay