Page 1 of 1
ERROR: DSP CONTROL CARD NOT READY
Posted:
Fri Jan 24, 2014 8:40 pmby Carlo
Dear All,
Has anyone encountered this error exactly when the software is loaded?
ERROR: DSP CONTROL CARD NOT READY
I have pulled out all removable cards ADAT's, UFX, MFX but no success. I have also re installed V5.1 but all for nothing.
Any help?
Carlo
Re: ERROR: DSP CONTROL CARD NOT READY
Posted:
Fri Jan 24, 2014 9:09 pmby Carlo
BIOS Settings were not good.....battery change...prob solved.
Re: ERROR: DSP CONTROL CARD NOT READY
Posted:
Sat Jan 25, 2014 1:21 amby Phil.c
Try disconnecting and reconnecting the data and BFC connectors, obviously with power off!
Phil
Re: ERROR: DSP CONTROL CARD NOT READY
Posted:
Sat Jan 25, 2014 4:58 pmby Carlo
The culprit was the bios Phil.C. All is ok now
Re: ERROR: DSP CONTROL CARD NOT READY
Posted:
Tue Jan 16, 2018 6:50 amby MPAV
I'm have the DSP error. Can't find any thing wrong with my Bios settings. What was wrong with your settings that fixed the issue?
Re: ERROR: DSP CONTROL CARD NOT READY
Posted:
Mon Jan 22, 2018 6:23 pmby arjepsen
It happens to me sometimes. It usually helps to wiggle the BFC connector around a bit.
Re: ERROR: DSP CONTROL CARD NOT READY
Posted:
Mon Jan 22, 2018 9:30 pmby RJH_MUSIC
Yes i have encountered it each and every time i boot up the d8b and the CF display does not light up immediately. It either boots up and wants authorization codes or i get that error. Next time you boot up, take note on if ant when the CF display comes alive.
Re: ERROR: DSP CONTROL CARD NOT READY
Posted:
Wed Jan 24, 2018 10:10 pmby RJH_MUSIC
If the CF-Display doe not come alive before the OS boots, you will get authorization errors, or hangs or the DSP error.