Page 1 of 1

ERROR: DSP CONTROL CARD NOT READY

PostPosted: Fri Jan 24, 2014 8:40 pm
by Carlo
Dear All,

Has anyone encountered this error exactly when the software is loaded?

ERROR: DSP CONTROL CARD NOT READY

I have pulled out all removable cards ADAT's, UFX, MFX but no success. I have also re installed V5.1 but all for nothing.

Any help?

Carlo

Re: ERROR: DSP CONTROL CARD NOT READY

PostPosted: Fri Jan 24, 2014 9:09 pm
by Carlo
BIOS Settings were not good.....battery change...prob solved.

Re: ERROR: DSP CONTROL CARD NOT READY

PostPosted: Sat Jan 25, 2014 1:21 am
by Phil.c
Try disconnecting and reconnecting the data and BFC connectors, obviously with power off!

Phil

Re: ERROR: DSP CONTROL CARD NOT READY

PostPosted: Sat Jan 25, 2014 4:58 pm
by Carlo
The culprit was the bios Phil.C. All is ok now

Re: ERROR: DSP CONTROL CARD NOT READY

PostPosted: Tue Jan 16, 2018 6:50 am
by MPAV
I'm have the DSP error. Can't find any thing wrong with my Bios settings. What was wrong with your settings that fixed the issue?

Re: ERROR: DSP CONTROL CARD NOT READY

PostPosted: Mon Jan 22, 2018 6:23 pm
by arjepsen
It happens to me sometimes. It usually helps to wiggle the BFC connector around a bit.

Re: ERROR: DSP CONTROL CARD NOT READY

PostPosted: Mon Jan 22, 2018 9:30 pm
by RJH_MUSIC
Yes i have encountered it each and every time i boot up the d8b and the CF display does not light up immediately. It either boots up and wants authorization codes or i get that error. Next time you boot up, take note on if ant when the CF display comes alive.

Re: ERROR: DSP CONTROL CARD NOT READY

PostPosted: Wed Jan 24, 2018 10:10 pm
by RJH_MUSIC
If the CF-Display doe not come alive before the OS boots, you will get authorization errors, or hangs or the DSP error.