Change font size   Print view

ERROR: DSP CONTROL CARD NOT READY

Discussion board for Mackie's d8b Digital Console users.

ERROR: DSP CONTROL CARD NOT READY

Postby Carlo » Fri Jan 24, 2014 8:40 pm

Dear All,

Has anyone encountered this error exactly when the software is loaded?

ERROR: DSP CONTROL CARD NOT READY

I have pulled out all removable cards ADAT's, UFX, MFX but no success. I have also re installed V5.1 but all for nothing.

Any help?

Carlo
If I have seen further it is only by standing on the shoulders of giants........
User avatar
Carlo
Premium Member
Premium Member
 
Posts: 431
Joined: Sat Jan 15, 2011 11:40 pm
Location: EU

Re: ERROR: DSP CONTROL CARD NOT READY

Postby Carlo » Fri Jan 24, 2014 9:09 pm

BIOS Settings were not good.....battery change...prob solved.
If I have seen further it is only by standing on the shoulders of giants........
User avatar
Carlo
Premium Member
Premium Member
 
Posts: 431
Joined: Sat Jan 15, 2011 11:40 pm
Location: EU

Re: ERROR: DSP CONTROL CARD NOT READY

Postby Phil.c » Sat Jan 25, 2014 1:21 am

Try disconnecting and reconnecting the data and BFC connectors, obviously with power off!

Phil
User avatar
Phil.c
Premium Member
Premium Member
 
Posts: 1087
Joined: Sun Nov 23, 2008 10:58 pm
Location: South Wales

Re: ERROR: DSP CONTROL CARD NOT READY

Postby Carlo » Sat Jan 25, 2014 4:58 pm

The culprit was the bios Phil.C. All is ok now
If I have seen further it is only by standing on the shoulders of giants........
User avatar
Carlo
Premium Member
Premium Member
 
Posts: 431
Joined: Sat Jan 15, 2011 11:40 pm
Location: EU

Re: ERROR: DSP CONTROL CARD NOT READY

Postby MPAV » Tue Jan 16, 2018 6:50 am

I'm have the DSP error. Can't find any thing wrong with my Bios settings. What was wrong with your settings that fixed the issue?
MPAV
Registered user
 
Posts: 4
Joined: Tue Jan 16, 2018 6:31 am

Re: ERROR: DSP CONTROL CARD NOT READY

Postby arjepsen » Mon Jan 22, 2018 6:23 pm

It happens to me sometimes. It usually helps to wiggle the BFC connector around a bit.
arjepsen
Premium Member
Premium Member
 
Posts: 592
Joined: Sun Nov 02, 2014 9:10 pm

Re: ERROR: DSP CONTROL CARD NOT READY

Postby RJH_MUSIC » Mon Jan 22, 2018 9:30 pm

Yes i have encountered it each and every time i boot up the d8b and the CF display does not light up immediately. It either boots up and wants authorization codes or i get that error. Next time you boot up, take note on if ant when the CF display comes alive.
2 d8b's 5.1 OS all the plugins, Mackie 32.8 Bus, 2 iMAC 27", Apollo 8 Quad, Cubase 9, Logic Pro X, VEP 6, 4 TB of VSTi Libraries, 28 Roland, Yamaha & Korg Synths and Keyboards, NI Hardware and Software.. Plugins, Plugins, and the list goes on...
User avatar
RJH_MUSIC
Premium Member
Premium Member
 
Posts: 291
Joined: Fri Oct 26, 2012 4:24 pm
Location: Brookfield, CT

Re: ERROR: DSP CONTROL CARD NOT READY

Postby RJH_MUSIC » Wed Jan 24, 2018 10:10 pm

If the CF-Display doe not come alive before the OS boots, you will get authorization errors, or hangs or the DSP error.
2 d8b's 5.1 OS all the plugins, Mackie 32.8 Bus, 2 iMAC 27", Apollo 8 Quad, Cubase 9, Logic Pro X, VEP 6, 4 TB of VSTi Libraries, 28 Roland, Yamaha & Korg Synths and Keyboards, NI Hardware and Software.. Plugins, Plugins, and the list goes on...
User avatar
RJH_MUSIC
Premium Member
Premium Member
 
Posts: 291
Joined: Fri Oct 26, 2012 4:24 pm
Location: Brookfield, CT


Return to d8b Forum

Who is online

Users browsing this forum: No registered users and 6 guests

cron