Change font size   Print view

db8 OS loadng issue

Discussion board for Mackie's d8b Digital Console users.

Re: db8 OS loadng issue

Postby captainamerica » Fri Sep 28, 2012 5:38 pm

All the POWER connectors are glued down but I will check again...99% of my problems have always been with these connectors
DAW: Genelec 8341,MacStudio, QuantumTB, Faderport16, DP, LogicProX, ProTools.BackupDAW:d8B, MacPro 2008 2xQuad-Core, MOTU (2408)LegacyDAW: A2000, Picasso II, Blizzard 68060@50 MHz|3xAD516 SunRize cards|HydraNexus Amiganet Ethernet.
User avatar
captainamerica
Premium Member
Premium Member
 
Posts: 338
Joined: Thu Nov 27, 2008 5:45 pm
Location: Boston, MA (org. from Montreal, Canada)

Re: db8 OS loadng issue

Postby Crash » Fri Sep 28, 2012 6:25 pm

Give all the power cables a going over. The headers tend to get wonky as they get older and the ends can get intermittent, especially where the cable ends meet the header. These were made in house at the mothership and have always had that "made in the garage" vibe to them.
User avatar
Crash
Premium Member
Premium Member
 
Posts: 1283
Joined: Fri Nov 21, 2008 10:05 pm

Re: db8 OS loadng issue

Postby captainamerica » Fri Sep 28, 2012 6:37 pm

Will check this weekend and get back to you...would much prefer to be doing music than debugging!

as always, thanks for the feedback
DAW: Genelec 8341,MacStudio, QuantumTB, Faderport16, DP, LogicProX, ProTools.BackupDAW:d8B, MacPro 2008 2xQuad-Core, MOTU (2408)LegacyDAW: A2000, Picasso II, Blizzard 68060@50 MHz|3xAD516 SunRize cards|HydraNexus Amiganet Ethernet.
User avatar
captainamerica
Premium Member
Premium Member
 
Posts: 338
Joined: Thu Nov 27, 2008 5:45 pm
Location: Boston, MA (org. from Montreal, Canada)

Re: db8 OS loadng issue

Postby captainamerica » Sat Sep 29, 2012 4:26 am

Crash

Right now when I boot the system none of my UFX cards and MFX are showing up after the "Loading DSP Plugins" message is displayed - no matter what slot I swap in and out of? I have 2 UFX and 1 MFX card.
DAW: Genelec 8341,MacStudio, QuantumTB, Faderport16, DP, LogicProX, ProTools.BackupDAW:d8B, MacPro 2008 2xQuad-Core, MOTU (2408)LegacyDAW: A2000, Picasso II, Blizzard 68060@50 MHz|3xAD516 SunRize cards|HydraNexus Amiganet Ethernet.
User avatar
captainamerica
Premium Member
Premium Member
 
Posts: 338
Joined: Thu Nov 27, 2008 5:45 pm
Location: Boston, MA (org. from Montreal, Canada)

Re: db8 OS loadng issue

Postby Crash » Sat Sep 29, 2012 4:10 pm

Are all of your I/O Cards being recognized by the console? This is just the FX cards? Is it booting all the way?

I feel like we are chasing our tails with this console.
User avatar
Crash
Premium Member
Premium Member
 
Posts: 1283
Joined: Fri Nov 21, 2008 10:05 pm

Re: db8 OS loadng issue

Postby captainamerica » Sat Sep 29, 2012 6:55 pm

Sometimes but it's inconsistent for my UFX & MFX cards
The only cards that are being recognized are my 3 Mackie OPT-8 Optical Cards

This morning I got prompt to authorize OS 5.1 again...than rebooted
D8b than recognized the cards but have no sound coming out of the board and no comm between Host/CPU and Board.

I have not reinstall O/S because I want to make sure this makes sense before I go down that road
DAW: Genelec 8341,MacStudio, QuantumTB, Faderport16, DP, LogicProX, ProTools.BackupDAW:d8B, MacPro 2008 2xQuad-Core, MOTU (2408)LegacyDAW: A2000, Picasso II, Blizzard 68060@50 MHz|3xAD516 SunRize cards|HydraNexus Amiganet Ethernet.
User avatar
captainamerica
Premium Member
Premium Member
 
Posts: 338
Joined: Thu Nov 27, 2008 5:45 pm
Location: Boston, MA (org. from Montreal, Canada)

Re: db8 OS loadng issue

Postby Crash » Sat Sep 29, 2012 7:24 pm

I am unsure what to tell you with so many oddities happening and the intermittent nature of the failures. To me, the fx card issue and the OS issue seem like they could be tied to the brainboard. All you can do is check connections there and see where that takes you.
User avatar
Crash
Premium Member
Premium Member
 
Posts: 1283
Joined: Fri Nov 21, 2008 10:05 pm

Re: db8 OS loadng issue

Postby captainamerica » Sat Sep 29, 2012 9:16 pm

OK....will try and do another connector pass

Thanks
DAW: Genelec 8341,MacStudio, QuantumTB, Faderport16, DP, LogicProX, ProTools.BackupDAW:d8B, MacPro 2008 2xQuad-Core, MOTU (2408)LegacyDAW: A2000, Picasso II, Blizzard 68060@50 MHz|3xAD516 SunRize cards|HydraNexus Amiganet Ethernet.
User avatar
captainamerica
Premium Member
Premium Member
 
Posts: 338
Joined: Thu Nov 27, 2008 5:45 pm
Location: Boston, MA (org. from Montreal, Canada)

Re: db8 OS loadng issue

Postby anyhorizon » Sun Sep 30, 2012 2:20 am

There was a lot of discussion regarding the backplane PCB attached to the card cage assembly over on the other forum. That forum is a bit hard to search these days but it may be worth a try.

Peter
In the scheme of things, there isn't one... just chaos.
User avatar
anyhorizon
Premium Member
Premium Member
 
Posts: 1069
Joined: Fri Nov 21, 2008 9:36 pm
Location: Down under or up over, depending on where in space you are.

Re: db8 OS loadng issue

Postby captainamerica » Sun Sep 30, 2012 7:57 pm

OK, thus are you suggesting that I focus on that and skip the HARD-DRIVE/OS reinstall?
DAW: Genelec 8341,MacStudio, QuantumTB, Faderport16, DP, LogicProX, ProTools.BackupDAW:d8B, MacPro 2008 2xQuad-Core, MOTU (2408)LegacyDAW: A2000, Picasso II, Blizzard 68060@50 MHz|3xAD516 SunRize cards|HydraNexus Amiganet Ethernet.
User avatar
captainamerica
Premium Member
Premium Member
 
Posts: 338
Joined: Thu Nov 27, 2008 5:45 pm
Location: Boston, MA (org. from Montreal, Canada)

PreviousNext

Return to d8b Forum

Who is online

Users browsing this forum: No registered users and 10 guests

cron