Eric Russ

[pino68]

Already formatted with the first disk. I installed the system. opens with the classic screen ... the mixer, however, after a minute goes to block and gives me the following image ...

[pino68]

I noticed that I can not do anything because the keyboard is on, but it does not allow me to do anything, it's like it's locked, plus even the mouse does not work and is blocked ...

[arjepsen]

I would say that is actually how the mixer should look - it's what mine looks like after I boot.

So your mouse and keyboard isn't working.
Did you check your bios settings?

[pino68]

Hello, in fact I had read something I do not remember where ... I do not know if you have to set the jamper of the card or see in the Bios.
In the Bios I can see why I know how to do it. In the card I need help.
You have been my salvation. Thank you

[pino68]

Nooooo. The same mistake is true. Help help
Error 43 Host did not boot.

[pino68]

Now works. I discovered that a memory card blocked my startup. I have three memory cards and one blocked everything.
I wanted to ask you to expand the memory of what kind it must be?

However, thank you very much, you have been very useful. It was almost a year since no one was able to start it, not even the last technician who shortened the cord from the mixer to the cpu.
You are really strong !!!!!

[arjepsen]

Glad that you finaly made it work!

[pino68]

Thanks Arjepsen for your precious help.
I have two questions to ask:
1) Which memory card should I take?
2) What is the meaning of a question mark (?) Flashing on the display of the mixer?

[arjepsen]

1: well, how much memory do you have in there now?
Check page 6 in the motherboard manual:
http://www.sonido-7.com/d8b/files/CB50- ... Manual.pdf

2:
The flashing question mark indicates that word clock of the d8b is set as "slave", but it isn't getting word clock sync from another device.
You can change it back to "master":
go to Setup (bottom of the main window), In that window go to the tab "Digital I/O". In the bottom left there's a drop down menu for the word clock. Change it to "internal".

[pino68]

Everything is ok Arjepsen. One last thing ... when I want to open a plugin it gives me the following error: Error # 74-plugin comunication failed
What it means?
Please note that my plugins are all authenticated, that is they are all original.