db8 OS loadng issue

by **Crash** » Thu Sep 27, 2012 2:05 pm

captainamerica wrote:I will check tonight when I am back home..silly question here but where is this feature?

"fader motors off"

Automation section, right hand side of the console under the "bypass" button

by **captainamerica** » Thu Sep 27, 2012 2:27 pm

OK...thanks again Crash, looks like I have a busy weekend!

BTW: I found cheap drives on NewEgg for $20 bucks..ordered 3 of them **in case * I need to reinstall OS.

Western Digital Caviar Blue WD800BB 80GB 7200 RPM 2MB Cache IDE Ultra ATA100 / ATA-6 3.5" Hard Drive -Bare Drive

http://www.newegg.com/Product/Product.a ... 6822136292

Jumper setting for 32gb is here as well for these drives:

http://wdc.custhelp.com/app/answers/det ... Y3bA%3D%3D

by **Crash** » Thu Sep 27, 2012 4:07 pm

Yea, I had found some on Tigerdirect but I was unsure if they could be jumpered down small enough so I didn't want to muddy the waters in case they couldn't. You can still get some of the smaller capacity drives via ebay if the need ever arises. Glad you got that sorted.

Hope you get your other oddities figured out.

by **captainamerica** » Thu Sep 27, 2012 4:19 pm

will keep you posted but I will do as you suggest , install OS and than check things again

by **captainamerica** » Fri Sep 28, 2012 3:25 am

Hey Crash

Good news, upon one more pass, I noticed a loose connector that I had overlooked....looks like all those intermittent issues were due to this loose connector. I am now back online!
Thus can you tell me what this connector does?

: connector.JPG (Array KiB) Viewed 1216 times

by **anyhorizon** » Fri Sep 28, 2012 4:00 am

It provides power from the power board and is adequately covered in the database.

Peter

by **captainamerica** » Fri Sep 28, 2012 4:23 am

Thanks Peter

by **Crash** » Fri Sep 28, 2012 6:23 am

As Peter states, that is power...to the DSP board to be more precise. Any of those cables like that with the big white header are power. I really figured you were having issues with power to the Brain board, the one in the middle mounted flat to the the metal pan. No matter, glad you are up and going again.

by **captainamerica** » Fri Sep 28, 2012 4:32 pm

Ughhhhh.....I ran a session for 3 hours last night with no hitch..got up this morning and turn on the board and again I am getting all "frozen faders" on reboot attempts. This frustrating because I can't figure out why it would run ok for 3 hours but not today?

by **Phil.c** » Fri Sep 28, 2012 5:24 pm

The only thing I can think of is it's cooling down has caused something to contract :?:

Phil

db8 OS loadng issue

Re: db8 OS loadng issue

Re: db8 OS loadng issue

Re: db8 OS loadng issue

Re: db8 OS loadng issue

Re: db8 OS loadng issue

Re: db8 OS loadng issue

Re: db8 OS loadng issue

Re: db8 OS loadng issue

Re: db8 OS loadng issue

Re: db8 OS loadng issue

Who is online