No fader, No poti movement

[schehf]

Here is a little video of the d8b
what it does and what it does not do.

http://youtu.be/eVJJ4UeXZbA

If anyone has a suggestion, that would be very appreciated.
Thank you !

[TerryO]

Hi, Me again! Having looked at your video and heard about the connecting of the board to 230 volts I suspect that the Linear/Analog power supply has been damaged. The transformer is designed to work on 110v. (I can see 110 marked on it). This PSU provides + and - 16v and 48volts. There are 3 fuses on that power supply. Have you checked them? If they are OK, with the aid of a meter, I'd check that the transformer is functioning. Good luck.

[schehf]

Thank you!

[schehf]

Hi, Me again! Having looked at your video and heard about the connecting of the board to 230 volts I suspect that the Linear/Analog power supply has been damaged. The transformer is designed to work on 110v. (I can see 110 marked on it). This PSU provides + and - 16v and 48volts. There are 3 fuses on that power supply. Have you checked them? If they are OK, with the aid of a meter, I'd check that the transformer is functioning. Good luck.

Thanks again for your help.
Finally it works now. I am so happy.

I checked all the voltages on the LInear Power Supply Board
and saw that the Transformer only gets 20V instead of the full 110V
So I changed the Fuse before the distribution of the transformer, even though it looks OK
and now everything works. Fader, Potis, Sound.
Perfect!

Thanks again.

[TerryO]

That's great. Well done!